 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RF Coaxial Connectors QT-BNC T his totally new termination technique provides the QT-BNC with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact. The QT-BNC is a 75 ohm pre-assembled connector with an integral center contact and rear crimp ferrule. This connector may be terminated onto cable in under 20 seconds, significantly reducing installation costs. Applications: * Broadcast Systems * Central Office Switching * Cross-Connect Equipment * Telecommunications Product Features For more information: www.ittcannon.com/cat078 identification of cable type. Performance Specifications Bump Cable Retention 4000 total at 390 m/s2 Cable Axial Force M17/29-RG59/U 133 N (30 lbs) min. 734 type 311 N (70 lbs) min. 735A type 111 N (25 lbs) min. 1694A 133 N (30 lbs) min. 500 mating cycles min. 1.5 A dc max. 22,3 N (5 lbs) min. axial force Outer contact: 1.0 m max.; Braid to body: 1.0 m max. 375 V ac rms min. at 21 km (70,000 ft) 445 N (100 lbs) min. 1500 V ac rms at sea level DC to 2.0 GHz 75 nominal 22,3 N (5 lbs) max. 0.2 dB max. at 2 GHz 5000 M min. -40C to 85C (-40F to 185F) 500 V ac rms at sea level -60 dB typical up to 2 GHz 490 m/s2 for 11 ms 3 m max. (excluding pole resistance) (a) Frequency range from 10 Hz to 500 Hz. (b) Displacement: 0.75 (.029). (c) Acceleration: 98 m/s2. (d) Duration: 6 hours. 1.2 max. (DC to 1 GHz); 1.3 max. (1 to 2 GHz) Torque 0,9 Nm (8.0 in. lbs) 0,9 Nm (8.0) in. lbs) 0,45 Nm (4.0 in. lbs) 0,9 Nm (8.0 in. lbs) Connector Durability Contact Current Rating Contact/Insulator Retention Contact Resistance Corona Level Coupling Mechanism Retention DWV Frequency Range Impedance Insertion Force Insertion Loss Insulation Resistance Operating Temperature Operating Voltage RF Leakage Shock Termination Resistance (QT Center contact) Vibration VSWR Materials and Finishes Description Connector Body Insulators Center Contact Male Coupling Nut Crimp Ferrule Spring Material Phosphor bronze Polymers rated to UL 94V-0 Beryllium copper Die Cast, Copper Zinc Alloy Annealed Copper Alloy Stainless Steel Finish 140 in. Nickel -- 50 in. Gold 80 in. Nickel 150 in. Nickel -- Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs Dimensions are shown in mm (inch) Dimensions subject to change Version 05.01.03 S-07 www.ittcannon.com RF Coaxial Connectors * Meets Telcordia/SMPTE 292M standards. * Designed for field installation. * Plastic rear cap is color coded for easy * Optional right angle strain relief boot * accessory (shown above). Compatible with select competitive crimp tools and die sets. * Complete assembly instructions are printed * on bags. Pneumatic crimp tool available. |
Price & Availability of QT-BNC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |